使用arm-linux-gcc 4.3.2编译必须启用内核中的Us..
时间：2010-11-20 来源：a-dong112
我用4.3.2编译器编译busybox1.13.0出现同样的错误，而内核是用4.3.3编译器编译的，更换成4.3.3编译busybox后，错误消失（内核配置已经勾选了EABI选项，但没有勾选old ABI）。
留个记号，转载原文如下：
不知道为什么使用arm-linux-gcc-4.3.2.tgz (with EABI) 86MB
编译同样的东西就是出现如下错误,感觉可能是busybox 1.14.3的问题,因为使用arm-linux-gcc-4.3.2编译出来的zImage可以使用正常挂在arm-linux-gcc-3.4.1编译器编译出来的动态busybox和库,但是使用arm-linux-gcc-4.3.2.tgz 编译出来的静态busybox就是会出现下面的错误,开始觉得明显是应用程序出了问题.后来发现原来是内核自己的事情，因为arm-linux-gcc-4.3.2.tgz使用了EABI方式,所以这就需要内核同样配置EABI编译属性才能支持EABI编译出来的应用程序busybox[luther.gliethttp]
错误原因：没有选择Use the ARM EABI to compile the kernel选项
Kernel Features
[ ] Use the ARM EABI to compile the kernel
解决方法：将它寻上之后自动多出下面一行,这样再次编译的内核就ok了,嘿嘿:)
[*] Use the ARM EABI to compile the kernel
[*] Allow old ABI binaries to run with this kernel (EXPERIMENTAL) (NEW)
ep93xx-rtc ep93xx-rtc: setting system clock to 1970-01-01 00:01:18 UTC (78)
Freeing init memory: 100K
Kernel panic - not syncing: Attempted to kill init!
Backtrace:
[<c00259c0>] (dump_backtrace+0x0/0x114) from [<c026d674>] (dump_stack+0x18/0x1c)
r7:c5818000 r6:c5817a40 r5:c5817a40 r4:c03291c4
[<c026d65c>] (dump_stack+0x0/0x1c) from [<c026d6c4>] (panic+0x4c/0x120)
[<c026d678>] (panic+0x0/0x120) from [<c00406e0>] (do_exit+0x70/0x58c)
r3:c0313004 r2:c5817a40 r1:c5819d0c r0:c02cbdcb
[<c0040670>] (do_exit+0x0/0x58c) from [<c0040c90>] (do_group_exit+0x94/0xc8)
[<c0040bfc>] (do_group_exit+0x0/0xc8) from [<c004ae40>] (get_signal_to_deliver+0x2ec/0x324)
r7:c5293a74 r6:c5818000 r5:c5819ed4 r4:00000004
[<c004ab54>] (get_signal_to_deliver+0x0/0x324) from [<c0024024>] (do_signal+0x58/0x528)
[<c0023fcc>] (do_signal+0x0/0x528) from [<c0024524>] (do_notify_resume+0x30/0x34)
[<c00244f4>] (do_notify_resume+0x0/0x34) from [<c0021e8c>] (work_pending+0x1c/0x20)
编译同样的东西就是出现如下错误,感觉可能是busybox 1.14.3的问题,因为使用arm-linux-gcc-4.3.2编译出来的zImage可以使用正常挂在arm-linux-gcc-3.4.1编译器编译出来的动态busybox和库,但是使用arm-linux-gcc-4.3.2.tgz 编译出来的静态busybox就是会出现下面的错误,开始觉得明显是应用程序出了问题.后来发现原来是内核自己的事情，因为arm-linux-gcc-4.3.2.tgz使用了EABI方式,所以这就需要内核同样配置EABI编译属性才能支持EABI编译出来的应用程序busybox[luther.gliethttp]
错误原因：没有选择Use the ARM EABI to compile the kernel选项
Kernel Features
[ ] Use the ARM EABI to compile the kernel
解决方法：将它寻上之后自动多出下面一行,这样再次编译的内核就ok了,嘿嘿:)
[*] Use the ARM EABI to compile the kernel
[*] Allow old ABI binaries to run with this kernel (EXPERIMENTAL) (NEW)
ep93xx-rtc ep93xx-rtc: setting system clock to 1970-01-01 00:01:18 UTC (78)
Freeing init memory: 100K
Kernel panic - not syncing: Attempted to kill init!
Backtrace:
[<c00259c0>] (dump_backtrace+0x0/0x114) from [<c026d674>] (dump_stack+0x18/0x1c)
r7:c5818000 r6:c5817a40 r5:c5817a40 r4:c03291c4
[<c026d65c>] (dump_stack+0x0/0x1c) from [<c026d6c4>] (panic+0x4c/0x120)
[<c026d678>] (panic+0x0/0x120) from [<c00406e0>] (do_exit+0x70/0x58c)
r3:c0313004 r2:c5817a40 r1:c5819d0c r0:c02cbdcb
[<c0040670>] (do_exit+0x0/0x58c) from [<c0040c90>] (do_group_exit+0x94/0xc8)
[<c0040bfc>] (do_group_exit+0x0/0xc8) from [<c004ae40>] (get_signal_to_deliver+0x2ec/0x324)
r7:c5293a74 r6:c5818000 r5:c5819ed4 r4:00000004
[<c004ab54>] (get_signal_to_deliver+0x0/0x324) from [<c0024024>] (do_signal+0x58/0x528)
[<c0023fcc>] (do_signal+0x0/0x528) from [<c0024524>] (do_notify_resume+0x30/0x34)
[<c00244f4>] (do_notify_resume+0x0/0x34) from [<c0021e8c>] (work_pending+0x1c/0x20)
相关阅读 更多 +
