文章详情

  • 游戏榜单
  • 软件榜单
关闭导航
热搜榜
热门下载
热门标签
php爱好者> php文档>操作笔记:Linux配置wpa

操作笔记:Linux配置wpa

时间:2010-11-20  来源:mydear

Linux最近几年发展迅速,很多人舍弃微软应用Linux操作系统,Linux的强大功能是那么吸引人。这里介绍一些Linux知识,今天讲解Linux配置wpa客户端步骤,望你能学会Linux配置wpa。

内核:

  1. bt tools # uname -a
  2. Linux bt 2.6.20-BT-PwnSauce-NOSMP #3 Sat Feb 24 15:52:59 GMT 2007 i686 i686 i386 GNU/Linux
  3. bt tools #

网卡:

  1. bt tools # lspci -vv |grep -i 394
  2. 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
  3. bt tools #

操作系统版本:

  1. bt tools # cat /etc/slax-version
  2. SLAX 6.0.0
  3. bt tools #
  4. 802.1x 客户端版本:
  5. bt ~ # wpa_supplicant -v
  6. wpa_supplicant v0.5.7
  7. Copyright (c) 2003-2006, Jouni Malinen and contributors
  8. bt ~ #
  9. bt tools #

配置文件内容: wpa 方式

  1. bt ~ # cat /etc/wpa_supplicant.conf
  2. network={
  3. ssid="youssid"
  4. psk="youpassword"
  5. }
  6. bt ~ #

命令以及参数:

命令:wpa_supplicant

使用参数:

  1. -B = run daemon in the background
  2. -c = Configuration file
  3. -i = interface name

命令执行例子:

wpa_supplicant -B -ieth0 -c /etc/wpa_supplicant.conf

获得地址:

dhcpcd eth0

察看网卡状态以及参数:

  1. bt ~ # iwconfig eth0
  2. eth0 IEEE 802.11g ESSID:"youssid"
  3. Mode:Managed Frequency:2.462 GHz Access Point: 00:00:00:00:00:00
  4. Bit Rate:54 Mb/s Tx-Power:14 dBm
  5. Retry limit:15 RTS thr:off Fragment thr:off
  6. Encryption key:xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx Security mode:open
  7. Power Management:off
  8. Link Quality=74/100 Signal level=-57 dBm Noise level=-57 dBm
  9. Rx invalid nwid:0 Rx invalid crypt:1 Rx invalid frag:0
  10. Tx excessive retries:0 Invalid misc:21 Missed beacon:0
  11. bt ~ # ifconfig eth0
  12. eth0 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx
  13. inet addr:192.168.2.100 Bcast:192.168.2.255 Mask:255.255.255.0
  14. inet6 addr: fe80::218:deff:feb0:38e5/64 Scope:Link
  15. UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
  16. RX packets:33 errors:2 dropped:31 overruns:0 frame:0
  17. TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
  18. collisions:0 txqueuelen:1000
  19. RX bytes:11177 (10.9 KiB) TX bytes:4324 (4.2 KiB)
  20. Interrupt:11 Base address:0x2000 Memory:edf00000-edf00fff

以上就是Linux配置wpa的方法,这样Linux就可以使用wpa访问无线网络了.要比wep好一些.


排行榜 更多 +
辰域智控app

辰域智控app

系统工具 下载
网医联盟app

网医联盟app

运动健身 下载
汇丰汇选App

汇丰汇选App

金融理财 下载