Linux Ftp mput 命令示例

#!/bin/sh
#cd
ftp -n -i 192.168.0.1 <<EOF
user username userpassword
passive
cd /jbpm
prompt
prompt
mput /var/lib/mysql/jbpm/*.* jbpm2010
quit
EOF

exit

 结果FileZilla报550错.

(000026) 2010-11-15 10:48:12 - dai (10.130.129.11)> STOR /var/lib/mysql/jbpm/qdcm_pow_items.frm
(000026) 2010-11-15 10:48:12 - dai (10.130.129.11)> 550 Filename invalid
(000026) 2010-11-15 10:48:12 - dai (10.130.129.11)> PORT 192,168,0,1,36,148
(000026) 2010-11-15 10:48:12 - dai (10.130.129.11)> 200 Port command successful
(000026) 2010-11-15 10:48:12 - dai (10.130.129.11)> STOR /var/lib/mysql/jbpm/qdcm_pow_sh.frm
(000026) 2010-11-15 10:48:12 - dai (10.130.129.11)> 550 Filename invalid
(000026) 2010-11-15 10:48:12 - dai (10.130.129.11)> PORT 192,168,0,1,36,149
(000026) 2010-11-15 10:48:12 - dai (10.130.129.11)> 200 Port command successful
(000026) 2010-11-15 10:48:12 - dai (10.130.129.11)> STOR /var/lib/mysql/jbpm/qdcm_tool_note.frm
(000026) 2010-11-15 10:48:12 - dai (10.130.129.11)> 550 Filename invalid
(000026) 2010-11-15 10:48:12 - dai (10.130.129.11)> PORT 192,168,0,1,36,150
(000026) 2010-11-15 10:48:12 - dai (10.130.129.11)> 200 Port command successful
(000026) 2010-11-15 10:48:12 - dai (10.130.129.11)> STOR /var/lib/mysql/jbpm/test.frm
(000026) 2010-11-15 10:48:12 - dai (10.130.129.11)> 550 Filename invalid 

尝试了好多把后，在网上搜了N吧，可能原因是路径/var/lib/mysql/jbpm/*.*，在脚本前加入 cd /var/lib/mysql/jbpm/，然后再mput *.* 就不报错了。原来FileZilla默认将/var/lib/mysql/jbpm/作为保存路径，在FTP服务器上自然就找不到这个路径。修改后就不报错了。

在Linux代码中使用prompt的目的是将Interactive mode 设置成off，这样的话在传文件时就不会有询问yes/no对话框。

每次使用prompt时，Interactive mode的状态就会改变，prompt on 或 off命令不起作用，并不能达到预期效果。