VMware Server虚拟机改网卡MAC地址（Oracle RAC ..

今天在虚拟机装ORACLE RAC环境的过程中，从rac1 copy所有文件到rac2，启动rac2后，发现网卡的物理地址

无法改动，点击probe也是无法探测改变，这样一来就和rac1冲突了，无法使用。

后来这样手工修改，就是用文本编辑器打开rac2目录下的rac1.vmx，改动下列粗体部分即可：

uuid.location = "56 4d a1 bc 49 b3 6f bb-27 0f 56 83 73 1e 4e 3e"
uuid.bios = "56 4d 9b f5 bf 62 36 eb-a1 90 be 7f ca b3 72 4e"
vc.uuid = "52 73 ab d1 ab e2 09 ee-89 1a 3f 45 52 53 a7 56"

ethernet0.generatedAddress = "00:0c:29:b3:72:4e"
ethernet1.generatedAddress = "00:0c:29:b3:72:58"

重新启动rac2后，进行网卡激活，完成。

[root@rac2 ~]# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:0C:29:B3:72:4E
          inet addr:134.98.83.222  Bcast:134.98.83.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:29ff:feb3:724e/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3215 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:258281 (252.2 KiB)  TX bytes:936 (936.0 b)
          Interrupt:5 Base address:0x2424

eth1      Link encap:Ethernet  HWaddr 00:0C:29:B3:72:58
          inet addr:10.10.10.32  Bcast:10.10.10.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:9 Base address:0x24a4