qemu+versatilepb+uboot+tftp+nfs+linux+busybox
时间：2010-09-21 来源：BinChengfei
U-Boot 2010.06 (Sep 20 2010 - 00:47:20)
DRAM: 0 Bytes
## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB
Flash: 0 Bytes
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: SMC91111-0
Hit any key to stop autoboot: 0
SMC91111: PHY auto-negotiate timed out
SMC91111: MAC 52:54:00:12:34:56
Using SMC91111-0 device
TFTP from server 192.168.1.37; our IP address is 192.168.1.137
Filename 'zImage'.
Load address: 0x7fc0
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
##################T ###############################################
#################################################################T
###
done
Bytes transferred = 2342796 (23bf8c hex)
## Booting kernel from Legacy Image at 00007fc0 ...
Image Name: VersatilePB
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2342732 Bytes = 2.2 MiB
Load Address: 00007fc0
Entry Point: 00008000
XIP Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Linux version 2.6.35.4 (xsoul@xsoul) (gcc version 4.3.2 (crosstool-NG-1.8.0) ) #5 Sun Sep 19 21:39:41 CST 2010
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177
CPU: VIVT data cache, VIVT instruction cache
Machine: ARM-Versatile PB
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: mem=128M root=/dev/nfs rw nfsroot=192.168.1.37:/srv/nfs/rootfs ip=192.168.1.137:192.168.1.37:192.168.1.1:255.255.255.0:xsoul:eth0:off console=ttyAMA0,115200 init=/linuxrc
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 125168k/125168k available, 5904k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xc8800000 - 0xd8000000 ( 248 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc0029000 ( 132 kB)
.text : 0xc0029000 - 0xc0435000 (4144 kB)
.data : 0xc0452000 - 0xc0481240 ( 189 kB)
Hierarchical RCU implementation.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:192
VIC @f1140000: id 0x00041190, vendor 0x41
Console: colour dummy device 80x30
Calibrating delay loop... 246.57 BogoMIPS (lpj=1232896)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Serial: AMBA PL011 UART driver
dev:f1: ttyAMA0 at MMIO 0x101f1000 (irq = 12) is a AMBA/PL011
console [ttyAMA0] enabled
dev:f2: ttyAMA1 at MMIO 0x101f2000 (irq = 13) is a AMBA/PL011
dev:f3: ttyAMA2 at MMIO 0x101f3000 (irq = 14) is a AMBA/PL011
fpga:09: ttyAMA3 at MMIO 0x10009000 (irq = 38) is a AMBA/PL011
bio: create slab <bio-0> at 0
SCSI subsystem initialized
Advanced Linux Sound Architecture Driver Version 1.0.23.
Switching to clocksource timer3
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
Installing knfsd (copyright (C) 1996 [email protected]).
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 244
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
CLCD: unknown LCD panel ID 0x00001000, using VGA
CLCD: Versatile hardware, VGA display
Console: switching to colour frame buffer device 80x60
brd: module loaded
nbd: registered device at major 43
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit)
flash size: 128 MiB
page size: 512 bytes
OOB area size: 16 bytes
sector size: 16 KiB
pages number: 262144
pages per sector: 32
bus width: 8
bits in sector size: 14
bits in page size: 9
bits in OOB size: 4
flash size with OOB: 135168 KiB
page address bytes: 4
sector address bytes: 3
options: 0x62
Scanning device for bad blocks
Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit":
0x000000000000-0x000008000000 : "NAND simulator partition 0"
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <[email protected]>
eth0: SMC91C11xFD (rev 1) at c8800000 IRQ 25 [nowait]
eth0: Ethernet addr: 52:54:00:12:34:56
mice: PS/2 mouse device common for all mice
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
Linux video capture interface: v2.00
mmci-pl18x fpga:05: mmc0: MMCI rev 0 cfg 00 at 0x0000000010005000 irq 22,33
mmci-pl18x fpga:0b: mmc1: MMCI rev 0 cfg 00 at 0x000000001000b000 irq 23,34
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
input: AT Raw Set 2 keyboard as /devices/fpga:06/serio0/input/input0
input: ImExPS/2 Generic Explorer Mouse as /devices/fpga:07/serio1/input/input1
eth0: link up
IP-Config: Complete:
device=eth0, addr=192.168.1.137, mask=255.255.255.0, gw=192.168.1.1,
host=xsoul, domain=, nis-domain=(none),
bootserver=192.168.1.37, rootserver=192.168.1.37, rootpath=
Looking up port of RPC 100003/2 on 192.168.1.37
Looking up port of RPC 100005/1 on 192.168.1.37
VFS: Mounted root (nfs filesystem) on device 0:11.
Freeing init memory: 132K
kernel 2.6.35.2 xsoul ttyAMA0
xsoul login:
DRAM: 0 Bytes
## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB
Flash: 0 Bytes
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: SMC91111-0
Hit any key to stop autoboot: 0
SMC91111: PHY auto-negotiate timed out
SMC91111: MAC 52:54:00:12:34:56
Using SMC91111-0 device
TFTP from server 192.168.1.37; our IP address is 192.168.1.137
Filename 'zImage'.
Load address: 0x7fc0
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
##################T ###############################################
#################################################################T
###
done
Bytes transferred = 2342796 (23bf8c hex)
## Booting kernel from Legacy Image at 00007fc0 ...
Image Name: VersatilePB
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2342732 Bytes = 2.2 MiB
Load Address: 00007fc0
Entry Point: 00008000
XIP Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Linux version 2.6.35.4 (xsoul@xsoul) (gcc version 4.3.2 (crosstool-NG-1.8.0) ) #5 Sun Sep 19 21:39:41 CST 2010
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177
CPU: VIVT data cache, VIVT instruction cache
Machine: ARM-Versatile PB
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: mem=128M root=/dev/nfs rw nfsroot=192.168.1.37:/srv/nfs/rootfs ip=192.168.1.137:192.168.1.37:192.168.1.1:255.255.255.0:xsoul:eth0:off console=ttyAMA0,115200 init=/linuxrc
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 125168k/125168k available, 5904k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xc8800000 - 0xd8000000 ( 248 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc0029000 ( 132 kB)
.text : 0xc0029000 - 0xc0435000 (4144 kB)
.data : 0xc0452000 - 0xc0481240 ( 189 kB)
Hierarchical RCU implementation.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:192
VIC @f1140000: id 0x00041190, vendor 0x41
Console: colour dummy device 80x30
Calibrating delay loop... 246.57 BogoMIPS (lpj=1232896)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Serial: AMBA PL011 UART driver
dev:f1: ttyAMA0 at MMIO 0x101f1000 (irq = 12) is a AMBA/PL011
console [ttyAMA0] enabled
dev:f2: ttyAMA1 at MMIO 0x101f2000 (irq = 13) is a AMBA/PL011
dev:f3: ttyAMA2 at MMIO 0x101f3000 (irq = 14) is a AMBA/PL011
fpga:09: ttyAMA3 at MMIO 0x10009000 (irq = 38) is a AMBA/PL011
bio: create slab <bio-0> at 0
SCSI subsystem initialized
Advanced Linux Sound Architecture Driver Version 1.0.23.
Switching to clocksource timer3
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
Installing knfsd (copyright (C) 1996 [email protected]).
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 244
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
CLCD: unknown LCD panel ID 0x00001000, using VGA
CLCD: Versatile hardware, VGA display
Console: switching to colour frame buffer device 80x60
brd: module loaded
nbd: registered device at major 43
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit)
flash size: 128 MiB
page size: 512 bytes
OOB area size: 16 bytes
sector size: 16 KiB
pages number: 262144
pages per sector: 32
bus width: 8
bits in sector size: 14
bits in page size: 9
bits in OOB size: 4
flash size with OOB: 135168 KiB
page address bytes: 4
sector address bytes: 3
options: 0x62
Scanning device for bad blocks
Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit":
0x000000000000-0x000008000000 : "NAND simulator partition 0"
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <[email protected]>
eth0: SMC91C11xFD (rev 1) at c8800000 IRQ 25 [nowait]
eth0: Ethernet addr: 52:54:00:12:34:56
mice: PS/2 mouse device common for all mice
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
Linux video capture interface: v2.00
mmci-pl18x fpga:05: mmc0: MMCI rev 0 cfg 00 at 0x0000000010005000 irq 22,33
mmci-pl18x fpga:0b: mmc1: MMCI rev 0 cfg 00 at 0x000000001000b000 irq 23,34
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
input: AT Raw Set 2 keyboard as /devices/fpga:06/serio0/input/input0
input: ImExPS/2 Generic Explorer Mouse as /devices/fpga:07/serio1/input/input1
eth0: link up
IP-Config: Complete:
device=eth0, addr=192.168.1.137, mask=255.255.255.0, gw=192.168.1.1,
host=xsoul, domain=, nis-domain=(none),
bootserver=192.168.1.37, rootserver=192.168.1.37, rootpath=
Looking up port of RPC 100003/2 on 192.168.1.37
Looking up port of RPC 100005/1 on 192.168.1.37
VFS: Mounted root (nfs filesystem) on device 0:11.
Freeing init memory: 132K
kernel 2.6.35.2 xsoul ttyAMA0
xsoul login:
相关阅读 更多 +
