[笔记].使用Cyclone III时，如何在Quartus II10.0中，将DATA[1]/ASDO和FLASH_nCE/nCSO设置为Use as reg

在Quartus II 10. 0中，选择Assignments>Device>Device and Pin Options>Dual Purpose Pins，可以将一些双功能引脚设置为Use as regular I/O。但是DATA[1]/ASDO和FLASH_nCE/nCSO却无法设置，这是Quartus II 10.0的GUI程序的BUG。那么我们怎么办呢？

很好办，因为GUI的配置，最终都是映射到配置文件中。而双功能引脚的设置在工程名.qsf中，使用Notepad++（或其他文本编辑器）打开，找到类似以下语句，手动修改保存即可。

set_global_assignment -name CYCLONEII_RESERVE_NCEO_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name RESERVE_DATA0_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name RESERVE_DATA1_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name RESERVE_FLASH_NCE_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name RESERVE_DCLK_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name RESERVE_DATA7_THROUGH_DATA2_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name RESERVE_OTHER_AP_PINS_AFTER_CONFIGURATION "USE AS REGULAR IO"

参考

Pin flash_nCE, nCE0 as I/O http://alteraforum.com/forum/showthread.php?t=24928