squid30_configure_guid
时间：2008-10-21 来源：h_xin8211
`configure' configures Squid Web Proxy 3.0.STABLE9 to adapt to many kinds of systems.
Usage: ./configure [OPTION]... [VAR=VALUE]...
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print `checking...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for `--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or `..'] Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[/usr/local/squid]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX] By default, `make install' will install all the files in
`/usr/local/squid/bin', `/usr/local/squid/lib' etc. You can specify
an installation prefix other than `/usr/local/squid' using `--prefix',
for instance `--prefix=$HOME'. For better control, use the options below. Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
--datadir=DIR read-only architecture-independent data [DATAROOTDIR]
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
--docdir=DIR documentation root [DATAROOTDIR/doc/squid]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
--psdir=DIR ps documentation [DOCDIR] Program names:
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM run sed PROGRAM on installed program names System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST cross-compile to build programs to run on HOST [BUILD] Optional Features:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
--disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors
--enable-shared[=PKGS] build shared libraries [default=no]
--enable-static[=PKGS] build static libraries [default=yes]
--enable-fast-install[=PKGS]
optimize for fast installation [default=yes]
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-gnuregex Compile GNUregex. Unless you have reason to use this
option, you should not enable it. This library file
is usually only required on Windows and very old
Unix boxes which do not have their own regex library
built in.
--disable-optimizations Don't compile Squid with compiler optimizations enabled.
Optimization is good for production builds, but not
good for debugging. During development, use
--disable-optimizations to reduce compilation times
and allow easier debugging. This option implicitly
also enabled --disable-inline
--disable-inline Don't compile trivial methods as inline. Squid
is coded with much of the code able to be inlined.
Inlining is good for production builds, but not
good for development. During development, use
--disable-inline to reduce compilation times and
allow incremental builds to be quick. For
production builds, or load tests, use
--enable-inline to have squid make all trivial
methods inlinable by the compiler.
--enable-debug-cbdata Provide some debug information in cbdata
--enable-xmalloc-statistics
Show malloc statistics in status page
--disable-carp Disable CARP support
--enable-async-io=N_THREADS
Shorthand for
--with-aufs-threads=N_THREADS
--with-pthreads
--enable-storeio=ufs,aufs
--enable-storeio=\"list of modules\"
Build support for the list of store I/O modules.
The default is only to build the "ufs" module.
See src/fs for a list of available modules, or
Programmers Guide section <not yet written>
for details on how to build your custom store module
--enable-disk-io=\"list of modules\"
Build support for the list of disk I/O modules.
The default is only to build the "Blocking" module.
See src/DiskIO for a list of available modules, or
Programmers Guide section <not yet written>
for details on how to build your custom disk module
--enable-removal-policies=\"list of policies\"
Build support for the list of removal policies.
The default is only to build the "lru" module.
See src/repl for a list of available modules, or
Programmers Guide section 9.9 for details on how
to build your custom policy
--enable-icmp Enable ICMP pinging
--enable-delay-pools Enable delay pools to limit bandwidth usage
--enable-esi Enable ESI for accelerators. Requires libexpat.
Enabling ESI will cause squid to follow the Edge
Acceleration Specification (www.esi.org). This
causes squid to IGNORE client Cache-Control headers.
DO NOT use this in a squid configured as a web
proxy, ONLY use it in a squid configured for
webserver acceleration.
--enable-icap-client Enable the ICAP client.
--enable-useragent-log Enable logging of User-Agent header
--enable-referer-log Enable logging of Referer header
--disable-wccp Disable Web Cache Coordination Protocol
--disable-wccpv2 Disable Web Cache Coordination V2 Protocol
--enable-kill-parent-hack
Kill parent on shutdown
--disable-snmp Disable SNMP monitoring support
--enable-cachemgr-hostname=hostname
Make cachemgr.cgi default to this host
--enable-arp-acl Enable use of ARP ACL lists (ether address)
--disable-htcp Disable HTCP protocol support
--enable-ssl Enable ssl gatewaying support using OpenSSL
--enable-forw-via-db Enable Forw/Via database
--enable-cache-digests Use Cache Digests
see http://www.squid-cache.org/FAQ/FAQ-16.html
--enable-default-err-language=lang
Select default language for Error pages (see
errors directory)
--enable-err-languages=\"lang1 lang2..\"
Select languages to be installed. (All will be
installed by default)
--disable-poll Disable poll() support.
--disable-select Disable select() support.
--enable-kqueue Enable kqueue() support (experimental).
--disable-epoll Disable Linux epoll() support.
--disable-http-violations
This allows you to remove code which is known to
violate the HTTP protocol specification.
--enable-ipfw-transparent
Enable Transparent Proxy support for systems
using FreeBSD IPFW style redirection.
--enable-ipf-transparent
Enable Transparent Proxy support for systems
using IP-Filter network address redirection.
--enable-pf-transparent
Enable Transparent Proxy support for systems
using PF network address redirection.
--enable-linux-netfilter
Enable Transparent Proxy support for Linux (Netfilter) systems.
--enable-linux-tproxy
Enable real Transparent Proxy support for Netfilter TPROXY.
--enable-leakfinder
Enable Leak Finding code. Enabling this alone
does nothing; you also have to modify the source
code to use the leak finding functions. Probably
Useful for hackers only.
--disable-ident-lookups
This allows you to remove code that performs
Ident (RFC 931) lookups.
--disable-internal-dns This prevents Squid from directly sending and
receiving DNS messages, and instead enables the
old external 'dnsserver' processes.
--enable-default-hostsfile=path
Select default location for hosts file.
See hosts_file directive in squid.conf for details
--enable-auth=\"list of auth scheme modules\"
Build support for the list of authentication schemes.
The default is to build support for the Basic scheme.
See src/auth for a list of available modules, or
Programmers Guide section authentication schemes
for details on how to build your custom auth scheme
module
--enable-basic-auth-helpers=\"list of helpers\"
This option selects which basic scheme proxy_auth
helpers to build and install as part of the normal
build process. For a list of available
helpers see the helpers/basic_auth directory.
--enable-ntlm-auth-helpers=\"list of helpers\"
This option selects which proxy_auth ntlm helpers
to build and install as part of the normal build
process. For a list of available helpers see
the helpers/ntlm_auth directory.
--enable-negotiate-auth-helpers=\"list of helpers\"
This option selects which proxy_auth negotiate helpers
to build and install as part of the normal build
process. For a list of available helpers see
the helpers/negotiate_auth directory.
--enable-digest-auth-helpers=\"list of helpers\"
This option selects which digest scheme authentication
helpers to build and install as part of the normal build
process. For a list of available helpers see the
helpers/digest_auth directory.
--enable-ntlm-fail-open Enable NTLM fail open, where a helper that fails one of the
Authentication steps can allow squid to still authenticate
the user.
--enable-external-acl-helpers=\"list of helpers\"
This option selects which external_acl helpers to
build and install as part of the normal build
process. For a list of available helpers see the
helpers/external_acl directory.
--disable-mempools Disable memPools. Note that this option now simply sets the
default behaviour. Specific classes can override this at runtime, and
only lib/MemPool.c needs to be altered to change the squid-wide
default for all classes.
--enable-win32-service Compile Squid as a WIN32 Service
Works only on Windows NT and Windows 2000 Platforms.
--disable-unlinkd Do not use unlinkd
--enable-stacktraces Enable automatic call backtrace on fatal errors
--enable-cpu-profiling
This option allows you to see which internal functions
in Squid are consuming how much CPU. Compiles in probes
that measure time spent in probed functions. Needs
source modifications to add new probes. This is meant
for developers to assist in performance optimisations
of Squid internal functions.
If you are not developer and not interested in the stats
you shouldn't enable this, as overhead added, although
small, is still overhead. See lib/Profiler.c for more. --enable-x-accelerator-vary
Enable support for the X-Accelerator-Vary
HTTP header. Can be used to indicate
variance within an accelerator setup.
Typically used together with other code
that adds custom HTTP headers to the requests. Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-pic try to use only PIC/non-PIC objects [default=use
both]
--with-tags[=TAGS] include additional configurations [automatic]
--with-default-user=USER System user account for squid permissions.
default: nobody
--with-aufs-threads=N_THREADS
Tune the number of worker threads for the aufs object
store.
--with-pthreads Use POSIX Threads
--with-aio Use POSIX AIO
--with-dl Use dynamic linking
--with-openssl=prefix
Compile with the OpenSSL libraries. The path to
the OpenSSL development libraries and headers
installation can be specified if outside of the
system standard directories
--with-coss-membuf-size COSS membuf size (default 1048576 bytes)
--with-large-files Enable support for large files (logs etc).
--with-build-environment=model
The build environment to use. Normally one of
POSIX_V6_ILP32_OFF32 32 bits
POSIX_V6_ILP32_OFFBIG 32 bits with large file support
POSIX_V6_LP64_OFF64 64 bits
POSIX_V6_LPBIG_OFFBIG large pointers and files
XBS5_ILP32_OFF32 32 bits (legacy)
XBS5_ILP32_OFFBIG 32 bits with large file support (legacy)
XBS5_LP64_OFF64 64 bits (legacy)
XBS5_LPBIG_OFFBIG large pointers and files (legacy)
default The default for your OS
--with-valgrind-debug Include debug instrumentation for use with valgrind
--with-filedescriptors=NUMBER
Force squid to support NUMBER filedescriptors
--with-cppunit-basedir=/path/to/cppunit-base
Path where the cppunit headers are libraries are found
for unit testing.
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
LIBS libraries to pass to the linker, e.g. -l<library>
CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
CXX C++ compiler command
CXXFLAGS C++ compiler flags
CPP C preprocessor
CXXCPP C++ preprocessor
F77 Fortran 77 compiler command
FFLAGS Fortran 77 compiler flags Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations. Report bugs to <http://www.squid-cache.org/bugs/>.
VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print `checking...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for `--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or `..'] Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[/usr/local/squid]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX] By default, `make install' will install all the files in
`/usr/local/squid/bin', `/usr/local/squid/lib' etc. You can specify
an installation prefix other than `/usr/local/squid' using `--prefix',
for instance `--prefix=$HOME'. For better control, use the options below. Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
--datadir=DIR read-only architecture-independent data [DATAROOTDIR]
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
--docdir=DIR documentation root [DATAROOTDIR/doc/squid]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
--psdir=DIR ps documentation [DOCDIR] Program names:
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM run sed PROGRAM on installed program names System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST cross-compile to build programs to run on HOST [BUILD] Optional Features:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
--disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors
--enable-shared[=PKGS] build shared libraries [default=no]
--enable-static[=PKGS] build static libraries [default=yes]
--enable-fast-install[=PKGS]
optimize for fast installation [default=yes]
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-gnuregex Compile GNUregex. Unless you have reason to use this
option, you should not enable it. This library file
is usually only required on Windows and very old
Unix boxes which do not have their own regex library
built in.
--disable-optimizations Don't compile Squid with compiler optimizations enabled.
Optimization is good for production builds, but not
good for debugging. During development, use
--disable-optimizations to reduce compilation times
and allow easier debugging. This option implicitly
also enabled --disable-inline
--disable-inline Don't compile trivial methods as inline. Squid
is coded with much of the code able to be inlined.
Inlining is good for production builds, but not
good for development. During development, use
--disable-inline to reduce compilation times and
allow incremental builds to be quick. For
production builds, or load tests, use
--enable-inline to have squid make all trivial
methods inlinable by the compiler.
--enable-debug-cbdata Provide some debug information in cbdata
--enable-xmalloc-statistics
Show malloc statistics in status page
--disable-carp Disable CARP support
--enable-async-io=N_THREADS
Shorthand for
--with-aufs-threads=N_THREADS
--with-pthreads
--enable-storeio=ufs,aufs
--enable-storeio=\"list of modules\"
Build support for the list of store I/O modules.
The default is only to build the "ufs" module.
See src/fs for a list of available modules, or
Programmers Guide section <not yet written>
for details on how to build your custom store module
--enable-disk-io=\"list of modules\"
Build support for the list of disk I/O modules.
The default is only to build the "Blocking" module.
See src/DiskIO for a list of available modules, or
Programmers Guide section <not yet written>
for details on how to build your custom disk module
--enable-removal-policies=\"list of policies\"
Build support for the list of removal policies.
The default is only to build the "lru" module.
See src/repl for a list of available modules, or
Programmers Guide section 9.9 for details on how
to build your custom policy
--enable-icmp Enable ICMP pinging
--enable-delay-pools Enable delay pools to limit bandwidth usage
--enable-esi Enable ESI for accelerators. Requires libexpat.
Enabling ESI will cause squid to follow the Edge
Acceleration Specification (www.esi.org). This
causes squid to IGNORE client Cache-Control headers.
DO NOT use this in a squid configured as a web
proxy, ONLY use it in a squid configured for
webserver acceleration.
--enable-icap-client Enable the ICAP client.
--enable-useragent-log Enable logging of User-Agent header
--enable-referer-log Enable logging of Referer header
--disable-wccp Disable Web Cache Coordination Protocol
--disable-wccpv2 Disable Web Cache Coordination V2 Protocol
--enable-kill-parent-hack
Kill parent on shutdown
--disable-snmp Disable SNMP monitoring support
--enable-cachemgr-hostname=hostname
Make cachemgr.cgi default to this host
--enable-arp-acl Enable use of ARP ACL lists (ether address)
--disable-htcp Disable HTCP protocol support
--enable-ssl Enable ssl gatewaying support using OpenSSL
--enable-forw-via-db Enable Forw/Via database
--enable-cache-digests Use Cache Digests
see http://www.squid-cache.org/FAQ/FAQ-16.html
--enable-default-err-language=lang
Select default language for Error pages (see
errors directory)
--enable-err-languages=\"lang1 lang2..\"
Select languages to be installed. (All will be
installed by default)
--disable-poll Disable poll() support.
--disable-select Disable select() support.
--enable-kqueue Enable kqueue() support (experimental).
--disable-epoll Disable Linux epoll() support.
--disable-http-violations
This allows you to remove code which is known to
violate the HTTP protocol specification.
--enable-ipfw-transparent
Enable Transparent Proxy support for systems
using FreeBSD IPFW style redirection.
--enable-ipf-transparent
Enable Transparent Proxy support for systems
using IP-Filter network address redirection.
--enable-pf-transparent
Enable Transparent Proxy support for systems
using PF network address redirection.
--enable-linux-netfilter
Enable Transparent Proxy support for Linux (Netfilter) systems.
--enable-linux-tproxy
Enable real Transparent Proxy support for Netfilter TPROXY.
--enable-leakfinder
Enable Leak Finding code. Enabling this alone
does nothing; you also have to modify the source
code to use the leak finding functions. Probably
Useful for hackers only.
--disable-ident-lookups
This allows you to remove code that performs
Ident (RFC 931) lookups.
--disable-internal-dns This prevents Squid from directly sending and
receiving DNS messages, and instead enables the
old external 'dnsserver' processes.
--enable-default-hostsfile=path
Select default location for hosts file.
See hosts_file directive in squid.conf for details
--enable-auth=\"list of auth scheme modules\"
Build support for the list of authentication schemes.
The default is to build support for the Basic scheme.
See src/auth for a list of available modules, or
Programmers Guide section authentication schemes
for details on how to build your custom auth scheme
module
--enable-basic-auth-helpers=\"list of helpers\"
This option selects which basic scheme proxy_auth
helpers to build and install as part of the normal
build process. For a list of available
helpers see the helpers/basic_auth directory.
--enable-ntlm-auth-helpers=\"list of helpers\"
This option selects which proxy_auth ntlm helpers
to build and install as part of the normal build
process. For a list of available helpers see
the helpers/ntlm_auth directory.
--enable-negotiate-auth-helpers=\"list of helpers\"
This option selects which proxy_auth negotiate helpers
to build and install as part of the normal build
process. For a list of available helpers see
the helpers/negotiate_auth directory.
--enable-digest-auth-helpers=\"list of helpers\"
This option selects which digest scheme authentication
helpers to build and install as part of the normal build
process. For a list of available helpers see the
helpers/digest_auth directory.
--enable-ntlm-fail-open Enable NTLM fail open, where a helper that fails one of the
Authentication steps can allow squid to still authenticate
the user.
--enable-external-acl-helpers=\"list of helpers\"
This option selects which external_acl helpers to
build and install as part of the normal build
process. For a list of available helpers see the
helpers/external_acl directory.
--disable-mempools Disable memPools. Note that this option now simply sets the
default behaviour. Specific classes can override this at runtime, and
only lib/MemPool.c needs to be altered to change the squid-wide
default for all classes.
--enable-win32-service Compile Squid as a WIN32 Service
Works only on Windows NT and Windows 2000 Platforms.
--disable-unlinkd Do not use unlinkd
--enable-stacktraces Enable automatic call backtrace on fatal errors
--enable-cpu-profiling
This option allows you to see which internal functions
in Squid are consuming how much CPU. Compiles in probes
that measure time spent in probed functions. Needs
source modifications to add new probes. This is meant
for developers to assist in performance optimisations
of Squid internal functions.
If you are not developer and not interested in the stats
you shouldn't enable this, as overhead added, although
small, is still overhead. See lib/Profiler.c for more. --enable-x-accelerator-vary
Enable support for the X-Accelerator-Vary
HTTP header. Can be used to indicate
variance within an accelerator setup.
Typically used together with other code
that adds custom HTTP headers to the requests. Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-pic try to use only PIC/non-PIC objects [default=use
both]
--with-tags[=TAGS] include additional configurations [automatic]
--with-default-user=USER System user account for squid permissions.
default: nobody
--with-aufs-threads=N_THREADS
Tune the number of worker threads for the aufs object
store.
--with-pthreads Use POSIX Threads
--with-aio Use POSIX AIO
--with-dl Use dynamic linking
--with-openssl=prefix
Compile with the OpenSSL libraries. The path to
the OpenSSL development libraries and headers
installation can be specified if outside of the
system standard directories
--with-coss-membuf-size COSS membuf size (default 1048576 bytes)
--with-large-files Enable support for large files (logs etc).
--with-build-environment=model
The build environment to use. Normally one of
POSIX_V6_ILP32_OFF32 32 bits
POSIX_V6_ILP32_OFFBIG 32 bits with large file support
POSIX_V6_LP64_OFF64 64 bits
POSIX_V6_LPBIG_OFFBIG large pointers and files
XBS5_ILP32_OFF32 32 bits (legacy)
XBS5_ILP32_OFFBIG 32 bits with large file support (legacy)
XBS5_LP64_OFF64 64 bits (legacy)
XBS5_LPBIG_OFFBIG large pointers and files (legacy)
default The default for your OS
--with-valgrind-debug Include debug instrumentation for use with valgrind
--with-filedescriptors=NUMBER
Force squid to support NUMBER filedescriptors
--with-cppunit-basedir=/path/to/cppunit-base
Path where the cppunit headers are libraries are found
for unit testing.
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
LIBS libraries to pass to the linker, e.g. -l<library>
CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
CXX C++ compiler command
CXXFLAGS C++ compiler flags
CPP C preprocessor
CXXCPP C++ preprocessor
F77 Fortran 77 compiler command
FFLAGS Fortran 77 compiler flags Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations. Report bugs to <http://www.squid-cache.org/bugs/>.
相关阅读 更多 +
排行榜 更多 +
