how to install Xdebug

Precompiled Modules
There are a few precompiled modules for Windows, they are all for the non-debug version of PHP. See the links on the right side.
Installing the precompiled modules is easy. Just place them in a directory, and add the following line to php.ini: (don't forget to change the path and filename to the correct one) zend_extension_ts="c:/php/modules/php_xdebug-4.4.1-2.0.2.dll"
PECL Installation
As of Xdebug 0.9.0 you can install Xdebug through PEAR/PECL. This only works with with PEAR version 0.9.1-dev or higher and some UNIX.
Installing with PEAR/PECL is as easy as:
# pecl install xdebug
but you still need to add the correct line to your php.ini: (don't forget to change the path and filename to the correct one)
zend_extension="/usr/local/php/modules/xdebug.so"
Installation From Source
You can download the source of the latest stable release 2.0.2. Alternatively you can obtain Xdebug from CVS:
cvs -d :pserver:[email protected]:/repository login
CVS password: srmread
cvs -d :pserver:[email protected]:/repository co xdebug
This will checkout the latest development version which is currently 2.1.0-dev.
Compiling
You compile Xdebug separately from the rest of PHP. Note, however, that you need access to the scripts 'phpize' and 'php-config'. If your system does not have 'phpize' and 'php-config', you will need to compile and install PHP from a source tarball first, as these script are by-products of the PHP compilation and installation processes. (Debian users can install the required tools with apt-get install php4-dev, or apt-get install php5-dev). It is important that the source version matches the installed version as there are slight, but important, differences between PHP versions. Once you have access to 'phpize' and 'php-config', do the following:

Unpack the tarball: tar -xzf xdebug-2.0.2.tgz. Note that you do not need to unpack the tarball inside the PHP source code tree. Xdebug is compiled separately, all by itself, as stated above.

• cd xdebug-2.0.2
  
• Run phpize: phpize (or /path/to/phpize if phpize is not in your path). See in the
  table below
  which version numbers it should show for different PHP versions. Make sure you use the phpize that belongs to the PHP version that you want to use Xdebug with.
  
• ./configure --enable-xdebug (or: ./configure --enable-xdebug --with-php-config=/path/to/php-config if php-config is not in your path).
  If this fails with something like: ../configure: line 1960: syntax error near unexpected token
  `PHP_NEW_EXTENSION(xdebug,'
  ../configure: line 1960: `  PHP_NEW_EXTENSION(xdebug, xdebug.c
  xdebug_code_coverage.c xdebug_com.c xdebug_handler_gdb.c
  xdebug_handler_php3.c xdebug_handlers.c xdebug_llist.c xdebug_hash.c
  xdebug_profiler.c xdebug_superglobals.c xdebug_var.c usefulstuff.c,
  $ext_shared)'then it means that you do not meet the PHP 4.3.x version requirement for Xdebug.
  Another problem that might occur is: configure: line 1145: PHP_INIT_BUILD_SYSTEM: command not found
  configure: line 1151: syntax error near unexpected token `config.nice'
  configure: line 1151: `PHP_CONFIG_NICE(config.nice)'You will need to upgrade your autotools (autoconf, automake and libtool) or install the known working versions: autoconf-2.13, automake-1.5 and libtool-1.4.3.
  
• make
  
• cp modules/xdebug.so /to/wherever/you/want/it
  Configure PHP to Use Xdebug
  
• add the following line to php.ini: zend_extension="/wherever/you/put/it/xdebug.so" (for non-threaded use of PHP, for example the CLI, CGI or Apache 1.3 module) or: zend_extension_ts="/wherever/you/put/it/xdebug.so" (for threaded usage of PHP, for example the Apache 2 work MPM or the the ISAPI module). Note: In case you compiled PHP yourself and used --enable-debug you would have to use zend_extension_debug=.
  
• Restart your webserver.
  
• Write a PHP page that calls 'phpinfo()' Load it in a browser and look for the info on the Xdebug module. If you see it next to the Zend logo, you have been successful! You can also use 'php -m' if you have a command line version of PHP, it lists all loaded modules. Xdebug should appear twice there (once under 'PHP Modules' and once under 'Zend Modules').
  Compatibility
  Xdebug does not work together with the Zend Optimizer or any other Zend extension (DBG, APD etc). This is due to compatibility problems with those modules. We will be working on figuring out what the problems are, and of course try to fix those.
  phpize Output Table
  PHP Version:
  PHP Api Version:
  Zend Module Api No:
  Zend Extension Api No:
  Recommended version:
  4.4.x
  20020918
  20020429
  20050606
  2.0.2
  5.1.x
  20041225
  20050922
  220051025
  2.0.2
  5.2.x
  20041225
  20060613
  220060519
  2.0.2
  Debugclient Installation
  Unpack the Xdebug source tarball and issue the following commands:
  $ cd debugclient
  $ ./configure --with-libedit
  $ make
  # make install
  This will install the debugclient binary in /usr/local/bin unless you don't have libedit installed on your system. You can either install it, or leave out the '--with-libedit' option to configure. Debian 'unstable' users can install the library with apt-get install libedit-dev libedit2.
  If the configure script can not find libedit and you are sure you have (and it's headers) installed correctly and you get link errors like the following in your configure.log:
  /usr/lib64/libedit.so: undefined reference to `tgetnum'
  /usr/lib64/libedit.so: undefined reference to `tgoto'
  /usr/lib64/libedit.so: undefined reference to `tgetflag'
  /usr/lib64/libedit.so: undefined reference to `tputs'
  /usr/lib64/libedit.so: undefined reference to `tgetent'
  /usr/lib64/libedit.so: undefined reference to `tgetstr'
  collect2: ld returned 1 exit status
  you need to change your configure command to:
  $ LDFLAGS=-lncurses ./configure --with-libedit