DHCP选项－－（六）NERWARE/IP网络子选项

NERWARE/IP网络子选项

       RFC2242 defines a set of encapsulated options for Novell NetWare/IP clients.  To use these options in the dhcp server, specify the option space name, "nwip", followed by a period, followed by  the  option  name. The following options can be specified:

       option nwip.nsq-broadcast flag;

     If  true,  the client should use the NetWare Nearest Server Query to locate a NetWare/IP server. The behaviour of the Novell client if this suboption is false, or is not present, is not specified.

       option nwip.preferred-dss ip-address [, ip-address... ];

     This suboption specifies a list of up to five IP addresses, each of which should be the IP address  of a NetWare Domain SAP/RIP server (DSS).

       option nwip.nearest-nwip-server ip-address [, ip-address...];

     This  suboption specifies a list of up to five IP addresses, each of which should be the IP address of a Nearest NetWare IP server.

       option nwip.autoretries uint8;

    Specifies the number of times that a NetWare/IP client should attempt to communicate with a given  DSS server at startup.

       option nwip.autoretry-secs uint8;

      Specifies  the  number of seconds that a Netware/IP client should wait between retries when attempting to establish communications with a DSS server at startup.

       option nwip.nwip-1-1 uint8;

      If true, the NetWare/IP client should support NetWare/IP version 1.1  compatibility.    This  is  only needed if the client will be contacting Netware/IP version 1.1 servers.

       option nwip.primary-dss ip-address;

      Specifies  the  IP  address  of  the  Primary  Domain SAP/RIP Service server (DSS) for this NetWare/IP domain.   The NetWare/IP administration utility uses this value as Primary DSS server when configuring a secondary DSS server.