squid2.6 for linux新版下载地址

`configure' configures Squid Web Proxy 2.6.STABLE4 to adapt to many kinds of systems.

Usage: ./configure [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as

VAR=VALUE.  See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

Configuration:

  -h, --help              display this help and exit

      --help=short        display options specific to this package

      --help=recursive    display the short help of all the included packages

  -V, --version           display version information and exit

  -q, --quiet, --silent   do not print `checking...' messages

      --cache-file=FILE   cache test results in FILE [disabled]

  -C, --config-cache      alias for `--cache-file=config.cache'

  -n, --no-create         do not create output files

      --srcdir=DIR        find the sources in DIR [configure dir or `..']

Installation directories:

  --prefix=PREFIX         install architecture-independent files in PREFIX

                          [/usr/local/squid]

  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX

                          [PREFIX]

By default, `make install' will install all the files in

`/usr/local/squid/bin', `/usr/local/squid/lib' etc.  You can specify

an installation prefix other than `/usr/local/squid' using `--prefix',

for instance `--prefix=$HOME'.

For better control, use the options below.

Fine tuning of the installation directories:

  --bindir=DIR           user executables [EPREFIX/bin]

  --sbindir=DIR          system admin executables [EPREFIX/sbin]

  --libexecdir=DIR       program executables [EPREFIX/libexec]

  --datadir=DIR          read-only architecture-independent data [PREFIX/share]

  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]

  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]

  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]

  --libdir=DIR           object code libraries [EPREFIX/lib]

  --includedir=DIR       C header files [PREFIX/include]

  --oldincludedir=DIR    C header files for non-gcc [/usr/include]

  --infodir=DIR          info documentation [PREFIX/info]

  --mandir=DIR           man documentation [PREFIX/man]

Program names:

  --program-prefix=PREFIX            prepend PREFIX to installed program names

  --program-suffix=SUFFIX            append SUFFIX to installed program names

  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names

System types:

  --build=BUILD     configure for building on BUILD [guessed]

  --host=HOST       cross-compile to build programs to run on HOST [BUILD]

Optional Features:

  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)

  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]

  --enable-maintainer-mode  enable make rules and dependencies not useful

                          (and sometimes confusing) to the casual installer

  --disable-dependency-tracking  speeds up one-time build

  --enable-dependency-tracking   do not reject slow dependency extractors

  --enable-dlmalloc=LIB Compile & use the malloc package by Doug Lea

  --enable-gnuregex       Compile GNUregex.  Unless you have reason to use this

                          option, you should not enable it.  This library file

                          is usually only required on Windows and very old

                          Unix boxes which do not have their own regex library

                          built in.

  --enable-mempool-debug  Include MemPool debug verifications

  --enable-xmalloc-statistics

                          Show malloc statistics in status page

  --disable-carp           Disable CARP support

  --enable-async-io=N_THREADS

                          Shorthand for

                          --with-aufs-threads=N_THREADS

                          --with-pthreads

                          --enable-storeio=ufs,aufs

  --enable-storeio="list of modules"

                          Build support for the list of store I/O modules.

                          The default is only to build the "ufs" module.

                          See src/fs for a list of available modules, or

                          Programmers Guide section <not yet written>

                          for details on how to build your custom store module

  --enable-heap-replacement

                          Backwards compatibility option. Please use the

                          new --enable-removal-policies directive instead.

  --enable-removal-policies="list of policies"

                          Build support for the list of removal policies.

                          The default is only to build the "lru" module.

                          See src/repl for a list of available modules, or

                          Programmers Guide section 9.9 for details on how

                          to build your custom policy

  --enable-icmp           Enable ICMP pinging

  --enable-delay-pools    Enable delay pools to limit bandwidth usage

  --enable-useragent-log  Enable logging of User-Agent header

  --enable-referer-log    Enable logging of Referer header

  --disable-wccp          Disable Web Cache Coordination V1 Protocol

  --disable-wccpv2        Disable Web Cache Coordination V2 Protocol

  --enable-kill-parent-hack

                          Kill parent on shutdown

  --enable-forward-log    Enable experimental forward_log directive

  --enable-multicast-miss Enable experimental multicast notification of cachemisses

  --enable-snmp           Enable SNMP monitoring

  --enable-cachemgr-hostname=hostname

                          Make cachemgr.cgi default to this host

  --enable-arp-acl        Enable use of ARP ACL lists (ether address)

  --enable-htcp           Enable HTCP protocol

  --enable-ssl            Enable ssl gatewaying support using OpenSSL

  --enable-forw-via-db    Enable Forw/Via database

  --enable-cache-digests  Use Cache Digests

                          see http://www.squid-cache.org/FAQ/FAQ-16.html

  --enable-default-err-language=lang

                          Select default language for Error pages (see

                          errors directory)

  --enable-err-languages=\"lang1 lang2..\"

                          Select languages to be installed. (All will be

                          installed by default)

  --enable-coss-aio-ops   Enable COSS I/O with Posix AIO (default is aufs I/O)

  --enable-select         Enable select() support.

  --disable-select        Disable select() support.

  --enable-poll           Enable poll() instead of select().  Normally poll

                          is preferred over select, but configure knows poll

                          is broken on some platforms.  If you think you are

                          smarter than the configure script, you may enable

                          poll with this option.

  --disable-poll          Disable the use of poll().

  --enable-epoll          Enable epoll() instead of poll() or select().

                          epoll() is best where available, but must be

                          explicitly set at the moment.

  --disable-epoll         Disable the use of epoll().

  --enable-kqueue         Enable kqueue support.

  --disable-kqueue        Disable kqueue support.

  --disable-http-violations

                          This allows you to remove code which is known to

                          violate the HTTP protocol specification.

  --enable-ipf-transparent

                          Enable Transparent Proxy support for systems

                          using IP-Filter network address redirection.

  --enable-pf-transparent

                          Enable Transparent Proxy support for systems

                          using PF network address redirection.

  --enable-linux-netfilter

                          Enable Transparent Proxy support for Linux 2.4 and later

  --enable-large-cache-files

                          Enable support for large cache files (>2GB).

                          WARNING: on-disk cache format is changed by this option

  --enable-linux-tproxy

                          Enable real Transparent Proxy support for Netfilter TPROXY.

  --enable-leakfinder

                          Enable Leak Finding code.  Enabling this alone

                          does nothing; you also have to modify the source

                          code to use the leak finding functions.  Probably

                          Useful for hackers only.

  --disable-ident-lookups

                          This allows you to remove code that performs

                          Ident (RFC 931) lookups.

  --disable-internal-dns  This prevents Squid from directly sending and

                          receiving DNS messages, and instead enables the

                          old external 'dnsserver' processes.

  --enable-truncate       This uses truncate() instead of unlink() when

                          removing cache files.  Truncate gives a little

                          performance improvement, but may cause problems

                          when used with async I/O.  Truncate uses more

                          filesystem inodes than unlink..

  --enable-default-hostsfile=path

                          Select default location for hosts file.

                          See hosts_file directive in squid.conf for details

  --enable-win32-service  Compile Squid as a WIN32 Service

                          Works only on Windows NT and Windows 2000 Platforms.

  --enable-auth="list of auth scheme modules"

                          Build support for the list of authentication schemes.

                          The default is to build support for the Basic scheme.

                          See src/auth for a list of available modules, or

                          Programmers Guide section authentication schemes

                          for details on how to build your custom auth scheme

                          module

  --enable-basic-auth-helpers="list of helpers"

                          This option selects which basic scheme proxy_auth

                          helpers to build and install as part of the normal

                          build process. For a list of available

                          helpers see the helpers/basic_auth directory.

  --enable-ntlm-auth-helpers="list of helpers"

                          This option selects which proxy_auth ntlm helpers

                          to build and install as part of the normal build

                          process. For a list of available helpers see

                          the helpers/ntlm_auth directory.

  --enable-digest-auth-helpers="list of helpers"

                          This option selects which digest scheme proxy_auth

                          helpers to build and install as part of the normal

                          build process. For a list of available helpers see the

                          helpers/digest_auth directory.

  --enable-negotiate-auth-helpers="list of helpers"

                          This option selects which negotiate scheme authentication

                          helpers to build and install as part of the normal build

                          process. For a list of available helpers see the

                          helpers/negotiate_auth directory.

  --enable-ntlm-fail-open Enable NTLM fail open, where a helper that fails one of the

                          Authentication steps can allow squid to still authenticate

                          the user.

  --enable-external-acl-helpers="list of helpers"

                          This option selects which external_acl helpers to

                          build and install as part of the normal build

                          process. For a list of available helpers see the

                          helpers/external_acl directory.

  --disable-unlinkd       Do not use unlinkd

  --enable-stacktraces    Enable automatic call backtrace on fatal errors

  --enable-x-accelerator-vary

                          Enable support for the X-Accelerator-Vary

                          HTTP header. Can be used to indicate

                          variance within an accelerator setup.

                          Typically used together with other code

                          that adds custom HTTP headers to the requests.

  --enable-follow-x-forwarded-for

                          Enable support for following the X-Forwarded-For

                          HTTP header to try to find the IP address of the

                          original or indirect client when a request has

                          been forwarded through other proxies.

Optional Packages:

  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]

  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)

  --with-valgrind-debug   Include debug instrumentation for use with valgrind

  --with-aufs-threads=N_THREADS

                          Tune the number of worker threads for the aufs object

                          store.

  --with-pthreads         Use POSIX Threads

  --with-aio              Use POSIX AIO

  --with-dl               Use dynamic linking

  --with-openssl=prefix

                          Compile with the OpenSSL libraries. The path to

                          the OpenSSL development libraries and headers

                          installation can be specified if outside of the

                          system standard directories

  --with-coss-membuf-size COSS membuf size (default 1048576 bytes)

  --with-large-files      Enable support for large files (logs etc).

  --with-build-environment=model

                          The build environment to use. Normally one of

                          POSIX_V6_ILP32_OFF32   32 bits

                          POSIX_V6_ILP32_OFFBIG  32 bits with large file support

                          POSIX_V6_LP64_OFF64    64 bits

                          POSIX_V6_LPBIG_OFFBIG  large pointers and files

                          XBS5_ILP32_OFF32       32 bits (legacy)

                          XBS5_ILP32_OFFBIG      32 bits with large file support (legacy)

                          XBS5_LP64_OFF64        64 bits (legacy)

                          XBS5_LPBIG_OFFBIG      large pointers and files (legacy)

                          default                The default for your OS

  --with-maxfd=N          Override maximum number of filedescriptors. Useful

                          if you build as another user who is not privileged

                          to use the number of filedescriptors you want the

                          resulting binary to support

Some influential environment variables:

  CC          C compiler command

  CFLAGS      C compiler flags

  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a

              nonstandard directory <lib dir>

  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have

              headers in a nonstandard directory <include dir>

  CPP         C preprocessor

Use these variables to override the choices made by `configure' or to help

it to find libraries and programs with nonstandard names/locations.

Report bugs to <http://www.squid-cache.org/bugs/>.