awstats 纯perl的方式 安装geoip插件
时间：2006-11-07 来源：xpk
There is a rumor that GeoIP is not supported by Powweb. This is completely false. It must first be configured prior to use. Now stay with me so I don't lose you...
1. Install your own copy of awstats in the cgi-bin directory. Once this is working properly, you may move on to the next step. There is a tutorial for this on the Powweb site under "Site Statistics" I believe.
2. Download GeoIP::PurePerl module from Maxmind.com
http://www.maxmind.com/download/geoip/api/pureperl/
1.17 is the latest version as of Sept 1, 2005. This is a tar.gz file so make sure you have WinRAR or another compatible decompressor.
3. Once decompressed, create a directory in your cgi-bin called GeoIP (You can name it anything you like, but for this tutorial it shall be GeoIP). Move the contents from the decompressed folder to "/cgi-bin/GeoIP/". The decompressed folder should be called "Geo-IP-PurePerl-1.xx". Now before we configure we need to get the latest database.
4. Download GeoIP.dat from this address
http://www.maxmind.com/download/geoip/database/GeoIP.dat.gz
Again this is a .gz file and must be decompressed. Once decompressed, move "GeoIP.dat" to "/cgi-bin/GeoIP/".
5. OK.. now to configure. First if you have turned on DNSLookup... turn it off. In Awstats.conf ---> DNSLookup=0 (this may also be a good time to change your logfile if you desire current stats over stats from yesterday. Remove the ".0" after "access". LogFile="/logs/access.0/1/xxxxxx_access_log" ---> LogFile="/logs/access/1/xxxxxx_access_log")
6. Next enable the GeoIP plugin by removing the # from before the command and add the path to the GeoIP.dat file. In Awstats.conf ---> LoadPlugin="geoip GEOIP_STANDARD /www/u/username/cgi-bin/GeoIP/GeoIP.dat" When that's complete, save awstats.conf
7. Now open up the geoip.pm file (located in awstats/plugins.... thanx Aza) so we may edit it. At the very top you'll see two directory entries. They'll say "Geo/IP.pm" and Geo/IP/PurePerl.pm". WE need to modify these to reflect the installation path. Change them to "/www/u/username/cgi-bin/GeoIP/lib/Geo/IP.pm" and "/www/u/username/cgi-bin/GeoIP/lib/Geo/IP/PurePerl.pm" respectively. Save and close.
8. Last but not least, open up "PurePerl.pm" located in "/cgi-bin/GeoIP/lib/Geo/IP". On lines 79 and 83 you'll fine directory listings for "GeoIP.dat". Change these to "/www/u/username/cgi-bin/GeoIP/GeoIP.dat". Save and close.
9. Everything should be set now. If it's working, you'll see a new column added to "Hosts" in Awstats named "GeoIP Country". This will list countries for all IP addresses, even ones collected before modification. The "Countries" area will show flags only for IP addresses collected after the modification. If you have trouble, set your crontab to execute awstats every minute. This is accomplished be setting time to * * * * *. Then check your cronlog located in your logs folder to view errors.
Erik Reedstrom
IT Department
www.BrokeHouse.com
1. Install your own copy of awstats in the cgi-bin directory. Once this is working properly, you may move on to the next step. There is a tutorial for this on the Powweb site under "Site Statistics" I believe.
2. Download GeoIP::PurePerl module from Maxmind.com
http://www.maxmind.com/download/geoip/api/pureperl/
1.17 is the latest version as of Sept 1, 2005. This is a tar.gz file so make sure you have WinRAR or another compatible decompressor.
3. Once decompressed, create a directory in your cgi-bin called GeoIP (You can name it anything you like, but for this tutorial it shall be GeoIP). Move the contents from the decompressed folder to "/cgi-bin/GeoIP/". The decompressed folder should be called "Geo-IP-PurePerl-1.xx". Now before we configure we need to get the latest database.
4. Download GeoIP.dat from this address
http://www.maxmind.com/download/geoip/database/GeoIP.dat.gz
Again this is a .gz file and must be decompressed. Once decompressed, move "GeoIP.dat" to "/cgi-bin/GeoIP/".
5. OK.. now to configure. First if you have turned on DNSLookup... turn it off. In Awstats.conf ---> DNSLookup=0 (this may also be a good time to change your logfile if you desire current stats over stats from yesterday. Remove the ".0" after "access". LogFile="/logs/access.0/1/xxxxxx_access_log" ---> LogFile="/logs/access/1/xxxxxx_access_log")
6. Next enable the GeoIP plugin by removing the # from before the command and add the path to the GeoIP.dat file. In Awstats.conf ---> LoadPlugin="geoip GEOIP_STANDARD /www/u/username/cgi-bin/GeoIP/GeoIP.dat" When that's complete, save awstats.conf
7. Now open up the geoip.pm file (located in awstats/plugins.... thanx Aza) so we may edit it. At the very top you'll see two directory entries. They'll say "Geo/IP.pm" and Geo/IP/PurePerl.pm". WE need to modify these to reflect the installation path. Change them to "/www/u/username/cgi-bin/GeoIP/lib/Geo/IP.pm" and "/www/u/username/cgi-bin/GeoIP/lib/Geo/IP/PurePerl.pm" respectively. Save and close.
8. Last but not least, open up "PurePerl.pm" located in "/cgi-bin/GeoIP/lib/Geo/IP". On lines 79 and 83 you'll fine directory listings for "GeoIP.dat". Change these to "/www/u/username/cgi-bin/GeoIP/GeoIP.dat". Save and close.
9. Everything should be set now. If it's working, you'll see a new column added to "Hosts" in Awstats named "GeoIP Country". This will list countries for all IP addresses, even ones collected before modification. The "Countries" area will show flags only for IP addresses collected after the modification. If you have trouble, set your crontab to execute awstats every minute. This is accomplished be setting time to * * * * *. Then check your cronlog located in your logs folder to view errors.
Erik Reedstrom
IT Department
www.BrokeHouse.com
相关阅读 更多 +
