vmware中配置host-only 和nat
时间：2006-10-30 来源：mrzcs
一.host-only
1.在windows中，本地连接－属性－tcp/ip protocol-advanced-share connection-choose vnet1 or vnet8-ok
vnet1/vnet8 的ip address 变为192.168.0.1， netmask 255.255.255.0
2.在vmware中
选择网络类型为host-only，将dhcp and nat停掉，
a. vi /etc/network/interfaces
auto eth0
iface eth0 inet static
address 192.168.0.66
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1 b. vi /etc/resolv.conf
iface eth0 inet static
address 192.168.0.66
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.2 b. vi /etc/resolv.conf
iface eth0 inet static
address 192.168.0.66
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1 b. vi /etc/resolv.conf
nameserver windows下的dns ip addr
#/etc/init.d/network restart二.nat
1.在windows中，本地连接－属性－tcp/ip protocol-advanced-share connection-choose vnet1 or vnet8-ok vnet1/vnet8 的ip address 变为192.168.0.1， netmask 255.255.255.02.在vmware中,选择网络类型为nat，将nat启动，gateway address 192.168.0.2
a. vi /etc/network/interfaces auto eth0iface eth0 inet static
address 192.168.0.66
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.2 b. vi /etc/resolv.conf
nameserver 192.168.0.2
#/etc/init.d/network restart
windows连上网，试用vmware ping host主机，ping 网关，ping dns，如果都能ping 通，则可以上网。
另外，如果在公司内部网使用vmware，若需使用代理服务器上网，不需要修改~/.profile增加代理服务器。
相关阅读 更多 +
