配置mlterm字体的方法

/etc/mlterm/aafont
ISO8859_1=Vera Sans Yuanti Mono-iso10646-1; //这个改成想要的英文字体
ISO8859_2=FreeMono-iso10646-1;
ISO8859_3=FreeMono-iso10646-1;
ISO8859_4=FreeMono-iso10646-1;
ISO8859_5=FreeMono-iso10646-1;
ISO8859_7=FreeMono-iso10646-1;
ISO8859_9=FreeMono-iso10646-1;
ISO8859_10=FreeMono-iso10646-1;
ISO8859_13=FreeMono-iso10646-1;
ISO8859_14=FreeMono-iso10646-1;
ISO8859_15=FreeMono-iso10646-1;
KOI8_R=Nimbus Mono L-iso10646-1;
KOI8_U=Nimbus Mono L-iso10646-1;
JISX0208_1978=Kochi Gothic-iso10646-1;
JISX0208_1983=Kochi Gothic-iso10646-1;
JISX0208_1990=Kochi Gothic-iso10646-1;
KSX1001_1997=dotum-iso10646-1;
//下面三个设置相应locale使用的中文字体，请设成自己满意的中文字体
BIG5=AR PL Mingti2L Big5-iso10646-1;   
GB2312_80=Vera Sans Yuanti-iso10646-1;
GBK=Vera Sans Yuanti-iso10646-1;

ISO10646_UCS2_1=FreeMono-iso10646-1;
# If you use UTF-8 but the range of characters is limited to ISO-8859-1,
# you may use the following line instead of the above line.
#ISO10646_UCS2_1=Courier 10 Pitch-iso10646-1;

## settings for UTF8 doublewidth (east Asian) characters
#
#  Since there are no TrueType fonts available which contains
#  all of east Asian characters so far, you have to choose
#  one of the following lines.

# Japanese speakers may want to enable the following setting.
ISO10646_UCS2_1_BIWIDTH=Kochi Gothic-iso10646-1;

# Korean speakers may want to enable the following setting.
#ISO10646_UCS2_1_BIWIDTH=dotum-iso10646-1;

# Traditional Chinese speakers may want to enable the following setting.
#ISO10646_UCS2_1_BIWIDTH=AR PL Mingti2L Big5-iso10646-1;

# Simplified Chinese speakers may want to enable the following setting.
//使用utf8 locale的就要改这个中文字体了，请使用自己机器里的中文字体
ISO10646_UCS2_1_BIWIDTH=Vera Sans Yuanti-iso10646-1;