ＡＳＰ：ＵＰＦＩＬＥ＿ＣＬＡＳＳ．ＡＳＰ

时间：2006-07-26 来源：ccut

<%
'----------------------------------------------------------------------
'转发时请保留此声明信息,这段声明不并会影响你的速度!
'*******************   无惧上传类 V1.2 ************************************
'作者:梁无惧
'网站:http://www.25cn.com
'电子邮件:[email protected]
'版权声明:版权所有,源代码公开,各种用途均可免费使用,但是修改后必须把修改后的文件
'发送一份给作者.并且保留作者此版权信息
'**********************************************************************
'----------------------------------------------------------------------
Dim oUpFileStream
'----------------------------------------------------------------------
'文件上传类
Class UpFile_Class Dim Form,File,Version,Err Private Sub Class_Initialize
Version = "无惧上传类 Version V1.2"
Err = -1
End Sub Private Sub Class_Terminate
'清除变量及对像
If Err < 0 Then
    Form.RemoveAll
    Set Form = Nothing
    File.RemoveAll
    Set File = Nothing
    oUpFileStream.Close
    Set oUpFileStream = Nothing
End If
End Sub

Public Sub GetData (MaxSize)
   '定义变量
Dim RequestBinData,sSpace,bCrLf,sInfo,iInfoStart,iInfoEnd,tStream,iStart,oFileInfo
Dim iFileSize,sFilePath,sFileType,sFormValue,sFileName
Dim iFindStart,iFindEnd
Dim iFormStart,iFormEnd,sFormName
   '代码开始
If Request.TotalBytes < 1 Then '如果没有数据上传
    Err = 1
    Exit Sub
End If
If MaxSize > 0 Then '如果限制大小
    If Request.TotalBytes > MaxSize Then
    Err = 2 '如果上传的数据超出限制
    Exit Sub
    End If
End If
Set Form = Server.CreateObject ("Scripting.Dictionary")
Form.CompareMode = 1
Set File = Server.CreateObject ("Scripting.Dictionary")
File.CompareMode = 1
Set tStream = Server.CreateObject ("ADODB.Stream")
Set oUpFileStream = Server.CreateObject ("ADODB.Stream")
oUpFileStream.Type = 1
oUpFileStream.Mode = 3
oUpFileStream.Open
oUpFileStream.Write Request.BinaryRead (Request.TotalBytes)
oUpFileStream.Position = 0
RequestBinData = oUpFileStream.Read
iFormEnd = oUpFileStream.Size
bCrLf = ChrB (13) & ChrB (10)
'取得每个项目之间的分隔符
sSpace = MidB (RequestBinData,1, InStrB (1,RequestBinData,bCrLf)-1)
iStart = LenB (sSpace)
iFormStart = iStart+2
'分解项目
Do
    iInfoEnd = InStrB (iFormStart,RequestBinData,bCrLf & bCrLf)+3
    tStream.Type = 1
    tStream.Mode = 3
    tStream.Open
    oUpFileStream.Position = iFormStart
    oUpFileStream.CopyTo tStream,iInfoEnd-iFormStart
    tStream.Position = 0
    tStream.Type = 2
    tStream.CharSet = "gb2312"
    sInfo = tStream.ReadText
    '取得表单项目名称
    iFormStart = InStrB (iInfoEnd,RequestBinData,sSpace)-1
    iFindStart = InStr (22,sInfo,"name=""",1)+6
    iFindEnd = InStr (iFindStart,sInfo,"""",1)
    sFormName = Mid (sinfo,iFindStart,iFindEnd-iFindStart)
    '如果是文件
    If InStr (45,sInfo,"filename=""",1) > 0 Then
      Set oFileInfo = new FileInfo_Class
      '取得文件属性
      iFindStart = InStr (iFindEnd,sInfo,"filename=""",1)+10
      iFindEnd = InStr (iFindStart,sInfo,"""",1)
      sFileName = Mid (sinfo,iFindStart,iFindEnd-iFindStart)
      oFileInfo.FileName = Mid (sFileName,InStrRev (sFileName, "\")+1)
      oFileInfo.FilePath = Left (sFileName,InStrRev (sFileName, "\"))
      oFileInfo.FileExt = Mid (sFileName,InStrRev (sFileName, ".")+1)
      iFindStart = InStr (iFindEnd,sInfo,"Content-Type: ",1)+14
      iFindEnd = InStr (iFindStart,sInfo,vbCr)
      oFileInfo.FileType = Mid (sinfo,iFindStart,iFindEnd-iFindStart)
      oFileInfo.FileStart = iInfoEnd
      oFileInfo.FileSize = iFormStart -iInfoEnd -2
      oFileInfo.FormName = sFormName
      file.add sFormName,oFileInfo
    else
    '如果是表单项目
      tStream.Close
      tStream.Type = 1
      tStream.Mode = 3
      tStream.Open
      oUpFileStream.Position = iInfoEnd
      oUpFileStream.CopyTo tStream,iFormStart-iInfoEnd-2
      tStream.Position = 0
      tStream.Type = 2
      tStream.CharSet = "gb2312"
      sFormValue = tStream.ReadText
      If Form.Exists (sFormName) Then
        Form (sFormName) = Form (sFormName) & ", " & sFormValue
        else
        form.Add sFormName,sFormValue
      End If
    End If
    tStream.Close
    iFormStart = iFormStart+iStart+2
    '如果到文件尾了就退出
Loop Until (iFormStart+2) >= iFormEnd
RequestBinData = ""
Set tStream = Nothing
End Sub
End Class '----------------------------------------------------------------------------------------------------
'文件属性类
Class FileInfo_Class
Dim FormName,FileName,FilePath,FileSize,FileType,FileStart,FileExt
'保存文件方法
Public Function SaveToFile (Path)
On Error Resume Next
Dim oFileStream
Set oFileStream = CreateObject ("ADODB.Stream")
oFileStream.Type = 1
oFileStream.Mode = 3
oFileStream.Open
oUpFileStream.Position = FileStart
oUpFileStream.CopyTo oFileStream,FileSize
oFileStream.SaveToFile Path,2
oFileStream.Close
Set oFileStream = Nothing
End Function

'取得文件数据
Public Function FileData
oUpFileStream.Position = FileStart
FileData = oUpFileStream.Read (FileSize)
End Function End Class
%>